AUTO TRUST - Yangon, Myanmar

It's hard for a machine to fail without the oil knowing first as oil is the best diagnostic medium. After all, when failures begin and progress over time, there is usually microscopic excavation of machine surfaces producing wear debris. Where does this debris go? It goes into the oil, of course. The oil is like a confessional for the machine. It gets all the bad news quick. For those trying to prevent unscheduled downtime by catching problems early, this is very good news for you.

Used Oil Analysis Program includes: -

Viscosity at 40oC & 100oC
TBN, TAN, Oxidation and Nitration
Contamination: Water, Glycol and Soot Insoluble
Wear Metals and Additive Elements
Diagnostic comment and Recommendation for Proactive Maintenance
Methodology: per ASTM D7417

Repeatability: per ASTM D7417

Early detection requires frequent detection. It doesn't matter how good your technology is; its effectiveness is limited if used infrequently. If your frequency of inspection is larger than P-F interval (Interval between Potential Failure Detection and Functional Failure), your monitoring program will be useless and just waste of money. Our experienced professionals will calculate carefully P-F interval of your equipment and make sure to monitor your equipment's condition continuously with correct frequency.

Our condition monitoring program is actually a proper combination of three condition monitoring techniques. It is carefully modeled to support your proactive maintenance. Condition Monitoring Program includes: -

Used Oil Analysis
Thermoscope Analysis
Oscilloscope Analysis
Trend Analysis, Diagnostic Comment and Technical advice