Myanmar Int'l F.A.C System Co Ltd - Yangon

GUARD P2 is specially formulated as a single component, ready-to-use, water-based, acrylic waterproof membrane. It is non-toxic and non-flammable and does not contain any hazardous materials.

GUARD P2 functions differently from other waterproofing membrane because GUARD P2 penetrates within the substrate and crystallizes/seals any pores or cracks, whereas other waterproofing membrane simply acts as a barrier in between the substrate and screed above. With its excellent elongation property, it is able to cater for movements in the substrate such as between brick wall and concrete substrate. It can therefore be used as a repair material for bridging cracks in substrate or cracks due to shrinkage. Guard P2 can accommodate movement of structure up to 8mm width.

Guard P2 comprises of special blend of polymers, fillers and additives, cures to form a tough, seamless, elastomeric waterproofing membrane with excellent adhesion to most substrates, as well as providing long term waterproofing protection with excellent UV resistance.

Description
Hybrid waterproofing coating for roofs with UV cross linking system. It is certified product, with high reflectance and total emittance providing thermal insulation. It forms a non-penetrating against moisture film with resistance to extreme low temperatures up to -35oC. Basic application is also the coating of the mineral bitumen membrane with gravity stone.

Fields of Application
Roofs made of concrete, cement boards, mosaic, cement slurries
Rooftops with resistance to stagnant water
Mineral bitumen membranes
Metallic surfaces
Beside and under photovoltaic panels, enhancing their efficiency
Air-conditioning tubes
New or old polyurethane waterproofing layers
Thermal-insulating polyurethane panels and polycarbonate panels
Glass surfaces
Galvanized metal sheets and bituminous membranes with aluminium sheet surface
Over old roofing made of asbestos
(Upon some surfaces above, it is necessary to prime them with the appropriate each time primer, before Neoroof® application)

Description
Two-component polyurethane solvent-based paint, suitable for external flooring applications.

Fields of application
Warehouse ramps, garages, metallic constructions, ourdoor stores, laundries, gas stations, etc.

Properties and Advantages
Contains UV filters, not affected by the sunlight and weather conditions
It exhibits very good resistance to abrasion and mechanical stress
High chemical resistance (in diluted acids-alkalis, car oil, petroleum, etc.)
Technical Characteristics
Appearance: Semi-gloss
Density: 1.25-1.30 g/cm3 ± 0,01 Kg/Lt (20oC)
Mixing ratios (weight prop.): 75A: 25B
Consumption: 350gr/m2 for two layers
Drying time (25oC): 3 hours
Dry to recoating (25oC): 24 hours
Pot life (25oC): 45 minutes
Walkability (25oC): 24 hours (The final hardening of the material is achieved after 7-10 days)
Abrasion resistance: 58mg (Taber test CS 10/1000/1000)
Adhesion strength: ≥3N/mm2 (concrete)
Flexibility: PASS (ASTM D522, 180° bend, 1/8″ mandrel)